final idea

                                                       Final idea 

Our final idea is the Wind Mill Generator and not the robotic hand as we had to buy the parts which costed a lot.

the software needed.

The software needed to make the generator is:

1. A propeller
2. A bulb
3. wire
4. magnet
5. plastic

advantages and disadvantages of my idea

Advantages and the disadvantages of the generatoe.
advantages
it wold generate energy easily.
it would be easy to make.
disadvantages
the model wont have a proper motor.                                                          it would be very delicate.

On my last post I discussed about my thoughts for the tech fair project, now on this post I will include some of the advantages and disadvantages of my ideas.

Robotic Arm Edge Advantages:

• We only have to buy one kit with no any other parts, so everything will be included.
• We have to construct the arm using the parts provided with the kit.
• It has instructions on constructing the arm.
• It is a simple robot not like other more complicating ones.
• It can be found in most of the technology shops.
• Is not very expensive considering that all part are provided in the kit.

Disadvantages:

• It is controlled with a remote, it is not allowed to be remote controlled. 
• We have to find a way to program it.

tech fair thoughts

• Robotic arm edge: our idea is to construct a robotic arm using a robotic arm kit. The type of kit we want to buy is Robotic Arm Edge OWI-535. The kit contains all parts needed to construct a robotic arm like on that picture, but the problem is it is controlled through a controller and it is not allowed. Therefore we will go further and program it on a computer, so it will work interdependently.

Robotic Arm Edge OWI-535

Wind Mill Generator- Our idea is about making a generator that is powered by wind.So when our wind mill we rotates using the motor the bulb glows.